Concrete, Cement & Plaster Stain - Bark Brown - 32 oz. = 5 Quarts

$59.99
Qty:

Secure Checkout Check out now.
Fast, Easy, Secure Checkout.

2

Concrete, Cement & Plaster Stain - Bark Brown - 32 oz. = 5 Quarts

Details

WHY CONSIDER OUR CONCRETE DYE STAINS FOR YOUR PROJECT?
Acrylic concrete stains are ideal for coloring just about any concrete surface. They penetrate the surface and create semi-transparent colors. Unlike the chemical process of acid stains, acrylic stains act like a dye or stain, producing a more uniform appearance. They are thin allowing them to seep into the pores of the surface they are covering. Thus, acrylic stains don't peel or flake away like paint will. They are resistant to Ulta-Violet rays, foot and vehicular traffic, heat from vehicle tires, moisture, mildew, acids and alkalis, as well as the ravages of mother nature. They work well for both new (like our stone and tile) or existing concrete surfaces. They are especially effective on concrete with too many cosmetic defects for acid staining.

Using concrete stain is an easy way to customize and jazz up plain gray concrete. It will bring color and life to your deck, driveway, patio, lanai, porch, basement floor, etc. Stain is a perfect alternative to paint when you want something that's not going to chip or flake. It also allows your concrete to maintain some of its natural appearance and character. You've probably heard of acid stain, and seen some examples of how these stains can transform the look of a concrete surface. Our stains are acrylic-based, designed for concrete, and may be more suitable and desirable for your safety, situation, taste, and the environment.

Acrylic Stains Versus Acid Stains: Our acrylic concrete stains are semi-tranlucent and create a more uniform color than an acid stain. It doesn't react with concrete, but penetrates the pores and adheres to the concrete, acting like a dye. You have much more control over the outcome, and our stains will help mask some of the surface defects and variations. These are much easier and safer to work with than acid stains, which is a major plus for the average do-it-yourselfer. Also, our dye stains are available in more vibrant colors. If you desire a brightly colored surface that you have control over the application with, then choose our stains.

GENERAL PRODUCT INFORMATION: These concentrated concrete stains come in 4 oz. samples, quarts, gallons, and (Special Order) 5-gallon pails. All sizes of dye stain concentrate are mixed 1 to 4 with distilled or de-ionized water. They yield five times the concentrate size of the desired color stain. THEY ARE AVAILABLE IN 20 COLORS.

4 oz. of concentrate yields 20 oz. of stain, and covers 35 square feet. - Shipping weight: 1 lb.
1-quart of concentrate yields 1.25 gallons and covers 300 square feet. - Shipping weight: 3 lbs.
1-gallon of concentrate yields 5 gallons and covers 1,000 square feet. - Shipping weight: 10 lbs.
5-gallons of concentrate yields 25 gallons and covers 5,000 square feet. - Shipping wT.: 47 lbs.

These are water-based, extra strength stains, developed to achieve a natural appearance on concrete floors. They were formulated as a user friendly alternative to hazardous solvent and acid-based stains. They offer superior adhesion to both interior and exterior concrete, brick, stone, plaster, and terra cotta surfaces. As with all stains, the use of a sealer is recommended to extend the stain's longevity.

APPLICATION METHOD: To achieve a natural variegate or mottled appearance, stain should be applied by creating a mist via an airless sprayer, High Volume Low Pressure (HVLP) sprayer, pump sprayer or trigger spray bottle (plant mister). The variegation is the result of the specific gravities of the pigments as well as the absorption rate of the application surface. Roller application methods force absorption, resulting in a more monotone or painted appearance. Application with a brush or sea sponge in areas where coverage and product control are warranted such as corners and walls, and other vertical applications, or where a sprcific pattern or design is desired.

Secondary - Highlight Color: To achieve increased color depth or mottled appearance, a secondary or highlight coat can be applied as soon as the initial color is dry to the touch, (approximately 15 minutes). Note: All Smith's Color Floor Colors are compatible, thus can be mixed, sprayed simultaneously and layered to achieve a desired appearance. Let your imagination run wild!

For additional information about these stains, please visit our www.TheMoldstore.info training and Information website. As always, should you have questions not answered on our websites, please email them to us, and we will get right back to you with an answer.

If you are interested in starting a stone, paver, brick and tile manufacturing business, visit www.Oldeworld.com, which is our Business Opportunity information website. There are also additional photos of installations available there.

Inspiration/Story Behind This Product

We started our company on January 15, 1992 to help homeowners, do-it-yourselfers, crafts people, gardeners, landscapers, and commercial concerns make their own custom-colored building products at home while saving as much as 90% off of the normal retail prices of those products. For example, concrete stone veneer that you see every day on the front of homes and buildings can cost more than six dollars per square foot, plus installation. With our molds and supplies, an average person can make comparable stone veneer for 45 to 65 cents per square foot, depending on the stone thickness and style. Custom-colored concrete tile can be made for about 30 cents a square foot. We also offer molds (moulds) for pavers, stepping stones, brick and more. And included with each purchase is a dedicated Instructions website, email support, customer contests, and more. Most of our website photos are from customers who had never used molds or worked with concrete or plaster before. WHY NOT YOU?

More Info

GENERAL PROPERTIES:
A decorative stain for concrete surfaces. Smith's Color Floor stain is water submersible, alkali, weather and UV light resistant. The use of a topcoat is suggested. The stain is compatible with solvent-based, water-based, single and two-component sealer products, including but not limited to urethanes, acrylics and epoxy clear sealers. Warning: They are not compatible with Methyl Methacrylate or penetrating (e.g. sodium silicate) sealers.

CLEAN UP: Immediately clean up work area and tools with water while stains are still wet. Compatible with neutralized acid-based stains. - Compatible with overlays, as a topical stain and as an integral color. - May be applied over previously sealed surface. - Low odor - Fast air-drying. - Fast delivery, NO Red Label. - Low VOC. - Interior or Exterior application.

Recommended Use: It is a user-friendly stain for concrete floors and other porous substrates. May be applied over sealed surfaces, (refer to Application Instructions).

Not Recommended For: Non-porous substrates (e.g. metal, resin, fiberglass) when submerged in water or exposed to severe weather conditions.

Thinning: The recommended dilution ratio of the stain/dye is 1 to 4 with distilled or de-ionized water. Increased transparency as well as lighter color shade can be achieved by increasing the dilution ratio (amount of water to concentrate). The dilution ratio should not surpass 1 part concentrate to 8 parts distilled, de-ionized or reverse osmosis water. Decreasing the dilution ratio (e.g. 1 part concentrate to 1 part water) will increase the hide or opacity. This allows the applicator to cover stains and blemishes as well as achieve uniformity on different surfaces. A natural variegated appearance is still achieved at lower dilution rates. Note: As dilution ratio increases, the amount of vehicle solids (glue) decreases, resulting in a less durable stain.

If you are interested in starting a stone, paver, brick and tile manufacturing business, visit www.Oldeworld.com, which is our Business Opportunity information website. There are also additional photos of installations available there.

Product Attributes

Color: Blue

Accepted Payments
  • PayPal Acceptance Mark

Shipping

United States
First Item: $0.00
Additional Items: $0.00

Policies

RETURN POLICY:

Items must be returned within 7 days of receipt, postage prepaid, with prior approval, and include the issued Return Authorization Number. Items of a proprietary nature like Training Manuals, Videos, etc. are not returnable.
Returned items are subject to a 20% restocking fee after 7 days.
All items must be in (new) unused, resaleable condition.
Items may not be returned without authorization number from Olde World.
Items returned without prior authorization will not be issued a credit.
Items shipped FREE will have the outbound shipping costs deducted from the credit.

We normally ship from our Port Charlotte, FL shipping facility daily. Orders are shipped UPS or USPS Priority Mail within the USA. We ship USPS Priority Mail International to foreign countries, as we've found that method to be the fastest, most reliable, and least expensive for our customers.

Orders are normally ready to be shipped the day after payment is received. The rest of the time it takes to get to you is due to the carrier's transit time. We have no control over that, so PLEASE... ALLOW SUFFICIENT "TRANSIT TIME" BEFORE CONTACTING OUR SHIPPING DEPARTMENT ABOUT YOUR ORDER.

Please understand that it takes over a week "in transit" for packages to reach the west coast. Figure on a total of ten days from the time you make an immediate payment for your purchase, before being concerned about the whereabouts of your order. Remember that UPS and other carriers normally do not work on weekends... and once in a great while, we don't either! :-)

FOR FASTEST SERVICE...
EMAIL SHIPPING QUESTIONS TO: HELP@OLDEWORLD.COM OR PHONE 941-624-5356

Reviews



TheMoldStore has not yet received any comments from shoppers.

Similar items

Related to this item

More items from TheMoldStore

  • Honey Stain
    Concrete, Cement, Plaster "Honey" Color Stain,...
    $14.99
  • Black
    Concrete, Cement and Plaster Color - Black - 5...
    $53.99
  • 30 Cobblestone Molds Make 1000s of 6x6x2.5...
    $209.99
  • Make Mexican Tiles Saltillo Floor Tile Kit...
    $421.99
  • Make Stone Wall Caps - DIY Supplies Kit + 6...
    $174.99
  • Make Castle Stone - DIY Supplies Kit + 29...
    $269.99
  • Make Ledgestone - DIY Rock Kit w/all Supplies+...
    $309.99
  • Make River Rock - DIY Kit with all Supplies+...
    $499.99
  • Make 8x8 Pavers - Driveway Paver Kit w/all...
    $153.99
  • 6x9 Driveway Paver Making Kit Complete w/all...
    $253.99
  • Make 6x9 Keyhole Driveway Pavers - Kit &...
    $299.99
  • Make Thick Driveway Pavers - DIY 5x9 Cobble...
    $349.99
  • MAKE 6x12 PAVERS - DIY Castle Stone Patio Kit...
    $193.99
  • MAKE 4x8 BRICK, Rustic Brick Veneer Kit...
    $199.99
  • Make Giant 19x34 Blank Panel Wall Plaques With...
    $79.99
  • Make Giant 19x34 Rampant Lion Wall Plaques...
    $159.99
  • MAKE Garden Edging - DIY Kit w/all Supplies+ 6...
    $159.99
  • MAKE Garden Edging - DIY Kit with all...
    $184.99
  • 12 Keystone Molds Make 1000s of Keystone...
    $47.99
  • Make 1000s of Keystone Driveway Pavers for...
    $54.99
  • Make 100s of Hex Driveway Pavers for Pennies...
    $58.99
  • Make Pavers for Pennies, 6 Thick 5x9 Brick...
    $69.99
  • 12 Cobblestone Molds Make 1000s of 6x6x2.5...
    $83.99
  • 13 Molds Make 1000s of Hex Driveway Pavers for...
    $119.99
  • 30 Concrete Molds Make 1000s of Keystone...
    $119.99
  • MAKE THIS TILE w/These Six 6x6x.5 Rustic...
    $22.99
  • MAKE THIS TILE w/These 12- 4x4 Daisy Design...
    $32.99
  • Make Slate Flagstones and Many Concrete Slab...
    $42.99
  • MAKE This 18x2 Inch Thick Compass Stepping...
    $42.99
  • Terra Cotta
    Concrete, Cement and Plaster Color - Terra...
    $14.79

More items on ArtFire